The first part of this third volume focuses on the design of mechatronic components, in particular the feed drives of machine tools used to generate highly dynamic drive movements. Engineering guides for the selection and design of important machine components, the control technology of feed drives, and the measuring systems required for position capture are presented. Another focus is on process and diagnostic equipment for manufacturing machines and systems. The second part describes control concepts including programming methods for various applications of modern production systems. Programmable logic controllers (PLC), numerical controllers (NC) and robot controllers (RC) are part of these presentations. In the context of automated manufacturing systems, the various levels of the automation pyramid and the importance of control systems are also outlined. Finally, the volume deals with the engineering of machines and plants.The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.Prof. Christian Brecher was elected as university professor for the Chair of Machine Tools at the Laboratory for Machine Tools and Production Engineering (WZL) of the RWTH Aachen University in 2004. He is also a member of the board of directors of the Laboratory for Machine Tools and Production Engineering (WZL) and of the Fraunhofer Institute for Production Technology (IPT), Aachen. He focuses on machine, transmission and control technology. Since 2012, as a co-founding member together with Prof. Hopmann, Prof. Brecher is head of the Aachen Center for Integrative Lightweight Production (AZL) of the RWTH Aachen University. Since 2018, Prof. Brecher has been head of the Fraunhofer Institute for Production Technology (IPT). Since 2019, he has been the spokesperson for the “Internet of Production” Cluster of Excellence at the RWTH Aachen University.Prof. em. Dr.-Ing. Dr.-Ing. E. h. Dr.-Ing. E.h. Manfred Weck was head of the Chair of Machine Tools at the Laboratory for Machine Tools and Production Engineering (WZL) of the RWTH Aachen University from 1973 to 2004. Since its foundation in 1980 until 2004, he was also Director and Head of the Department for Production Machines of the Fraunhofer Institute for Production Technology (IPT), Aachen. He founded the AiF Research Community “Ultrapräzisionstechnik e.V.” (Ultraprecision technology) in 1988. Over the years, Prof. Weck received various honors and awards, amongst them the SME Frederick W. Taylor Research Medal in 2007 and the Acceptance into the Hall of Fame of the Manager Magazine in 2015. Furthermore, Prof. Weck received the Aachen Engineering Prize in 2017, honoring him for his life’s work.

• 关于产品：
• ● 正版保障：本网站隶属于中国国际图书贸易集团公司，确保所有图书都是100%正版。
• ● 环保纸张：进口图书大多使用的都是环保轻型张，颜色偏黄，重量比较轻。
• ● 毛边版：即书翻页的地方，故意做成了参差不齐的样子，一般为精装版，更具收藏价值。
• 
  关于退换货：
• 由于预订产品的特殊性，采购订单正式发订后，买方不得无故取消全部或部分产品的订购。
• 由于进口图书的特殊性，发生以下情况的，请直接拒收货物，由快递返回：
• ● 外包装破损/发错货/少发货/图书外观破损/图书配件不全（例如：光盘等）
  并请在工作日通过电话400-008-1110联系我们。
• 签收后，如发生以下情况，请在签收后的5个工作日内联系客服办理退换货：
• ● 缺页/错页/错印/脱线
• 
  关于发货时间：
• 一般情况下：
• ●【现货】 下单后48小时内由北京（库房）发出快递。
• ●【预订】【预售】下单后国外发货，到货时间预计5-8周左右，店铺默认中通快递，如需顺丰快递邮费到付。
• ● 需要开具发票的客户，发货时间可能在上述基础上再延后1-2个工作日（紧急发票需求，请联系010-68433105/3213）；
• ● 如遇其他特殊原因，对发货时间有影响的，我们会第一时间在网站公告，敬请留意。
• 
  关于到货时间：
• 由于进口图书入境入库后，都是委托第三方快递发货，所以我们只能保证在规定时间内发出，但无法为您保证确切的到货时间。
• ● 主要城市一般2-4天
• ● 偏远地区一般4-7天
• 
  关于接听咨询电话的时间：
• 010-68433105/3213正常接听咨询电话的时间为：周一至周五上午8：30～下午5：00，周六、日及法定节假日休息，将无法接听来电，敬请谅解。
• 其它时间您也可以通过邮件联系我们：customer@readgo.cn,工作日会优先处理。
• 
  关于快递：
• ● 已付款订单：主要由中通、宅急送负责派送，订单进度查询请拨打010-68433105/3213。