The book focuses on the conservation of iron and copper objects that mostly belong to the Iron Age sites of K2 and Mapungubwe (AD 825-1290), the two most prominent archaeological settlements in the middle Limpopo valley area of northern South Africa. For the purpose of conservation three main objectives were considered: revealing the material and methods of fabrication; evaluating physical and chemical stability; and preservation. Chapter 1 provides a short introduction to the study and presents its objectives. Chapter 2 then sets out the analytical methods and principles used in gathering and managing the data obtained. Next, Chapters 3 and 4 discuss the methods of manufacture of the selected artefacts as well as their physical stability. In these chapters the artefacts were respectively studied by the use of non-destructive methods such as neutron tomography and microscopy. Here, a new quantitative technique for estimating the corrosion percentage by using neutron tomograms and IMAGEJ software was introduced. Some of the objects with ambiguities as to their fabrication, were sampled destructively for metallographical examination and further chemical analyses. The native objects were manufactured by hot forging or cold working followed by annealing only in the case of copper, strip twisting and casting of molten copper in one piece mould. Meanwhile, new light was shed regarding signs of a new technique used in the production of some types of round wire on Mapungubwe Hill (strip-drawing). Chapter 5 examines the chemical stability of the artefacts and the deterioration processes affecting them, considering both the composition of corrosion products and the effects of environmental conditions on their formation. This information was gathered using analytical techniques such as Raman spectroscopy, XRD and SEM-EDS. Chapter 6 then presents suitable and practical conservation methods for the objects in question. These methods consist of both interventive and preventive conservation. The thesis concludes (in Chapter 7) with a summary of the results obtained.

• 关于产品：
• ● 正版保障：本网站隶属于中国国际图书贸易集团公司，确保所有图书都是100%正版。
• ● 环保纸张：进口图书大多使用的都是环保轻型张，颜色偏黄，重量比较轻。
• ● 毛边版：即书翻页的地方，故意做成了参差不齐的样子，一般为精装版，更具收藏价值。
• 
  关于退换货：
• 由于预订产品的特殊性，采购订单正式发订后，买方不得无故取消全部或部分产品的订购。
• 由于进口图书的特殊性，发生以下情况的，请直接拒收货物，由快递返回：
• ● 外包装破损/发错货/少发货/图书外观破损/图书配件不全（例如：光盘等）
  并请在工作日通过电话400-008-1110联系我们。
• 签收后，如发生以下情况，请在签收后的5个工作日内联系客服办理退换货：
• ● 缺页/错页/错印/脱线
• 
  关于发货时间：
• 一般情况下：
• ●【现货】 下单后48小时内由北京（库房）发出快递。
• ●【预订】【预售】下单后国外发货，到货时间预计5-8周左右，店铺默认中通快递，如需顺丰快递邮费到付。
• ● 需要开具发票的客户，发货时间可能在上述基础上再延后1-2个工作日（紧急发票需求，请联系010-68433105/3213）；
• ● 如遇其他特殊原因，对发货时间有影响的，我们会第一时间在网站公告，敬请留意。
• 
  关于到货时间：
• 由于进口图书入境入库后，都是委托第三方快递发货，所以我们只能保证在规定时间内发出，但无法为您保证确切的到货时间。
• ● 主要城市一般2-4天
• ● 偏远地区一般4-7天
• 
  关于接听咨询电话的时间：
• 010-68433105/3213正常接听咨询电话的时间为：周一至周五上午8：30～下午5：00，周六、日及法定节假日休息，将无法接听来电，敬请谅解。
• 其它时间您也可以通过邮件联系我们：customer@readgo.cn,工作日会优先处理。
• 
  关于快递：
• ● 已付款订单：主要由中通、宅急送负责派送，订单进度查询请拨打010-68433105/3213。