Modern design methods of Automotive Cam Design require the computation of a range of parameters. This book provides a logical sequence of steps for the derivation of the relevant equations from first principles, for the more widely used cam mechanisms. Although originally derived for use in high performance engines, this work is equally applicable to the design of mass produced automotive and other internal combustion engines. This work may also be applicable for cams used in other areas such as printing and packaging machinery. Introduction to Analytical Methods for Internal Combustion Engine Cam Mechanisms provides the equations necessary for the design of cam lift curves with an associated smooth acceleration curve. The equations are derived for the kinematics and kinetics of all the mechanisms considered, together with those for cam curvature and oil entrainment velocity. This permits the cam shape, all loads and contact stresses to be evaluated, and the relevant tribology to be assessed. The effects of asymmetry on the manufacture of cams for finger follower and offset translating curved followers is described, and methods for transformation of cam shape data to that for a radial translating follower are given. This permits the manufacture and inspection by a wider range of CNC machines. The calculation of unsteady camshaft torques is described and an outline given for evaluation of the components for the lower engine orders. Although the theory, use and design, of reactive pendulum dampers are well documented elsewhere, these subjects have also been considered for completeness. The final chapter presents analysis of push rod mechanisms, including a four bar chain mechanism, which is more robustWritten both as a reference for practising automotive design and development Engineers, and a text book for automotive engineering students, Introduction to Analytical Methods for Internal Combustion Engine Cam Mechanisms gives readers a thorough introduction into the design of automotive cam mechanisms, including much material not previously published.

• 关于产品：
• ● 正版保障：本网站隶属于中国国际图书贸易集团公司，确保所有图书都是100%正版。
• ● 环保纸张：进口图书大多使用的都是环保轻型张，颜色偏黄，重量比较轻。
• ● 毛边版：即书翻页的地方，故意做成了参差不齐的样子，一般为精装版，更具收藏价值。
• 
  关于退换货：
• 由于预订产品的特殊性，采购订单正式发订后，买方不得无故取消全部或部分产品的订购。
• 由于进口图书的特殊性，发生以下情况的，请直接拒收货物，由快递返回：
• ● 外包装破损/发错货/少发货/图书外观破损/图书配件不全（例如：光盘等）
  并请在工作日通过电话400-008-1110联系我们。
• 签收后，如发生以下情况，请在签收后的5个工作日内联系客服办理退换货：
• ● 缺页/错页/错印/脱线
• 
  关于发货时间：
• 一般情况下：
• ●【现货】 下单后48小时内由北京（库房）发出快递。
• ●【预订】【预售】下单后国外发货，到货时间预计5-8周左右，店铺默认中通快递，如需顺丰快递邮费到付。
• ● 需要开具发票的客户，发货时间可能在上述基础上再延后1-2个工作日（紧急发票需求，请联系010-68433105/3213）；
• ● 如遇其他特殊原因，对发货时间有影响的，我们会第一时间在网站公告，敬请留意。
• 
  关于到货时间：
• 由于进口图书入境入库后，都是委托第三方快递发货，所以我们只能保证在规定时间内发出，但无法为您保证确切的到货时间。
• ● 主要城市一般2-4天
• ● 偏远地区一般4-7天
• 
  关于接听咨询电话的时间：
• 010-68433105/3213正常接听咨询电话的时间为：周一至周五上午8：30～下午5：00，周六、日及法定节假日休息，将无法接听来电，敬请谅解。
• 其它时间您也可以通过邮件联系我们：customer@readgo.cn,工作日会优先处理。
• 
  关于快递：
• ● 已付款订单：主要由中通、宅急送负责派送，订单进度查询请拨打010-68433105/3213。